Is there any benefit to host my own instance?

  • Korgen@lemmy.korgen.xyz
    link
    fedilink
    English
    arrow-up
    71
    arrow-down
    1
    ·
    1 year ago

    I run my own instance, the benefit is privacy and reliability. Everything is controlled on your own server. You also aren’t reliant on someone else running an instance that could go down at any time, either permanently or an outage. Been a problem with Lemmy.ml recently.

    • StrangeWorrier@lemmy.world
      link
      fedilink
      English
      arrow-up
      35
      arrow-down
      1
      ·
      1 year ago

      You also aren’t reliant on someone else running an instance that could go down at any time, either permanently or an outage.

      You have to worry about it yourself though.

      • Muddybulldog@lemmy.world
        link
        fedilink
        English
        arrow-up
        20
        ·
        1 year ago

        A balancing act for sure. I’m torn on the topic. With some much excitement right now but so little history there’s a lot of uncertainty where to “plant your flag”. Part of me wants to setup my own instance simply so I maintain control of my identity should .world suddenly disappear. On the other hand now I have the responsibility of making sure I don’t make myself disappear. The mental debate will continue.

        • IowaMan@lemmy.world
          link
          fedilink
          English
          arrow-up
          8
          ·
          1 year ago

          I think for now it’s so early it doesn’t matter all that much. Just have fun! You can make multiple accounts so why not

      • CaptainApathetic@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Yea but if you host with a major cloud server provider you’re basically having 100% uptime because they very very rarely go down and so the only issues would be stuff you’d have to deal with.

    • Kyoyeou (Ki jəʊ juː)@lemmy.world
      link
      fedilink
      English
      arrow-up
      11
      ·
      1 year ago

      I was asking myself a question, if you comment like you did here Is it saved in the server on which the original post is, or is it saved on your server?

      • SmugBedBug@lemmy.iswhereits.at
        link
        fedilink
        English
        arrow-up
        11
        ·
        1 year ago

        Kind of both. His server has a mirror of the community. When he comments it gets saved on his server and the his server communicates with the original server. In turn the original server also communicates his comment with other federated servers.

        • pzza@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 year ago

          If data is migrated from server to server, as the community grows in size, the data to be maintained on each server also grows in size? Also i’ve seen some servers allow the creation of new users/communities, but some don’t… whats the point of that if the data is just replicated anyway?

          • jcg@halubilo.social
            link
            fedilink
            English
            arrow-up
            3
            ·
            1 year ago

            Yes that’s right, an instance is constantly accumulating data over time, however instances that aren’t the origin instance have the option of going back and deleting old posts (manually in the DB) but then their users wouldn’t be able to see them anymore. I do get the concern though, if things really start to pickup and we get insane volume, I’m afraid even my instance wouldn’t be able to pick up. I’d have to unsubscribe from everything. On the other hand, I think people will come up with solutions as things scale. There’s a lot of unknowns right now, too many to build a solution. Just take a look at mastodon and how its model has changed over time.

        • pzza@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          If data is migrated from server to server, as the community grows in size, the data to be maintained on each server also grows in size? Also i’ve seen some servers allow the creation of new users/communities, but some don’t… whats the point of that if the data is just replicated anyway?

      • Lucas@lemmy.lucaslower.com
        link
        fedilink
        English
        arrow-up
        8
        ·
        edit-2
        1 year ago

        I believe it is saved first on the instance you’re signed up for, then gets pushed around the network using the Activity pub protocol. So it eventually ends up being stored across many instances of it has far enough reach.

    • jason@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      8
      ·
      1 year ago

      How is your RAM/storage usage? I’m interested in setting up my own instance (no communities, just a username that will always be here) but don’t want to upgrade my VPS again. I already had to do that spinning up a Mastodon server.

        • jason@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          14
          ·
          1 year ago

          haha better than the 12GB and rising of my single-user Mastodon instance. And this is with deleting my media cache every night.

        • Jamoke@lemmy.themainframe.org
          link
          fedilink
          English
          arrow-up
          5
          ·
          edit-2
          1 year ago

          The pictures folder on my instance is at 1.3GB after two days. It’s just me and my friend. About how many communities are you subscribed to?

        • gabe565@lemmy.cook.gg
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Up to 400MB after two days here. I took a look at the code and it looks like Lemmy keeps all ActivityPub JSON for 6 months. It would be nice if it was possible to shorten that.

          I’m still happy that I’m hosting my own instance, but I hope this thing doesn’t get too big!

          • livingcoder@lemmy.austinwadeheller.com
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            1 year ago

            So long as you can run Docker, I would think that you could setup an instance. You just need to make sure that the image you use for lemmy and lemmy-ui are compatible with your platform. I had to alter the provided docker-compose.yml file to use arm64 versions for my RaspberryPi.

            I mentioned the total disk usage for the sake of setting up a pi. I don’t know what the space requirements are for lemmy separate from the bulkiness of an Ubuntu 22.04 install.

  • ubergeek77@lemmy.ubergeek77.chat
    link
    fedilink
    English
    arrow-up
    53
    ·
    edit-2
    1 year ago

    I did. The benefits as I see them:

    • I can still use Lemmy if the instance I would have used as my “home instance” ever went down.
    • Even if a public instance doesn’t go down, all this extra load is making strange bugs surface that I don’t encounter (I still have the live refresh bug everyone has, but not this one).
    • I have full control over my account.
    • If I ever want to get to customizing my UI later, I can.
    • Content I create originates on my instance, and I have full control over it. I can’t stop other instances from caching what I post publicly, but this still gives me more data governance.
    • I can curate my “All” tab to only show stuff I actually want to see, instead of trying to figure out how to block communities (not sure if that’s possible for regular users).
    • I get a custom domain which I think is pretty neat.
    • fishhf@reddthat.com
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      I wonder if it’s possible to migrate those Reddit datasets and import them into our own Lemmy instance

      • OutrageousUmpire@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        ·
        1 year ago

        I’ve wondered the same. I know I’m not the only one with the 1.8 TB Reddit data dump. It would be cool to import all that into a Lemmy instance.

  • Matt@netmonkey.tech
    link
    fedilink
    English
    arrow-up
    31
    ·
    1 year ago

    I think it’s a matter of personal preference.

    I’ve been running my own Mastodon instance for several months now, and I’ve enjoyed it. I don’t have to rely on someone else, either, which is nice. I’m in control of everything on that instance.

    As for Lemmy, I just started my own instance today, and am currently writing you from it. What made me decide to setup my own instance was some performance issues I was seeing with Lemmy.world, although that might have been an UI problem. Anyway, I enjoy doing this stuff, so I’m running my own instance for the sake of doing it.

    On the flip side, it’s more expensive and time consuming, and I’m the one who has to worry about backing up data, etc. Like I said, though, I enjoy doing it, so it’s no big deal.

    • drlecompte@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      I run my own Mastodon instance, but for Lemmy it seemed more logical to join an existing instance that aligned with my interests. I wouldn’t be adverse to abandoning my self-hosted Mastodon for a shared instance, but I would prefer a small instance run by and for people I know, rather than one of the huge ones.

      • Matt@netmonkey.tech
        link
        fedilink
        English
        arrow-up
        6
        ·
        1 year ago

        What might make you want to ditch your self-hosted Mastodon instance?

        With Lemmy, I didn’t feel a need to pick any specific instance because I can follow communities from anywhere, and it seems to work pretty well.

        One downside I’ve encountered with my own Lemmy instance is that post and comment history in the communities I follow begins when I started following them on my new instance. New posts and comments are federated my way, going forward, but I don’t have the ability to go back and view as much history as one would on lemmy.world or lemmy.ml, for example.

          • Matt@netmonkey.tech
            link
            fedilink
            English
            arrow-up
            3
            ·
            1 year ago

            I didn’t have this problem with Mastodon, but totally had it with Pixelfed. I don’t think Pixelfed, at least at that time, supported relays. I scraped around pixelfed.social to find people to follow because I had an account there. It didn’t seem possible at the time to see profiles on public servers, without having an account, so it was hard finding people. It was something I was used to do doing on Mastodon. In the end, I didn’t have a positive experience running my own Pixelfed instance, and just decided to use pixelfed.social.

            I do follow the developer and he’s been making a lot of great progress. I’ve got the mobile app, and it’s quite decent.

        • drlecompte@discuss.tchncs.de
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Basically just the hastle of maintaining and hosting it. My ideal situation would be an instance with a few people, where we can share some of the burden, and perhaps cost. But maybe that has its own headaches when there is a falling out etc.

          There are also other drawbacks with your own Mastodon instance in terms of discovering new people, as a lot of those tools are geared towards the server scope, and Mastodon prohibits a full index search.

          I actually don’t know what the Lemmy policy is on indexing, but a way to search the entire Fediverse (or at least large parts of it) would help tremendously in popularizing it, I think. I understand why indexing would be blocked, but that seems a lot like security by obscurity to me, which I don’t think works very well.

          • Matt@netmonkey.tech
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            1 year ago

            Basically just the hastle of maintaining and hosting it. My ideal situation would be an instance with a few people, where we can share some of the burden, and perhaps cost. But maybe that has its own headaches when there is a falling out etc.

            All very good points. I wouldn’t mind sharing the costs and burden with some folks, but I’m pretty happy just maintaining it myself. Again, for me, it’s something I enjoy doing.

            There are also other drawbacks with your own Mastodon instance in terms of discovering new people, as a lot of those tools are geared towards the server scope, and Mastodon prohibits a full index search.

            I never really had that problem, but then I started out on other Mastodon instances and just migrated my account around until I ended up on my own personal instance. I also participate in several relays, which helps a lot. In the end, I’ve also spent time looking at the public feeds on other servers and browsing their profiles to find people. Another thing I did was participate in conversations, which was a good way to get mutual followers.

            With that being said, I don’t follow a ton of people either. I read my entire timeline, chronologically, so I keep it pretty tailored. I disable boosts and mute/unfollow people often.

            I actually don’t know what the Lemmy policy is on indexing, but a way to search the entire Fediverse (or at least large parts of it) would help tremendously in popularizing it, I think. I understand why indexing would be blocked, but that seems a lot like security by obscurity to me, which I don’t think works very well.

            Lemmy indexes everything on the server, as far as I know, which means you should be able to find local content and content federated to the instance.

    • ipkpjersi@lemmy.one
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      As someone who likes having control over their data and especially backups, and someone who normally enjoys self-hosting things, I honestly might do it. I’m not sure if I’d want to host a lemmy instance or kbin instance though, since I know they all federate together anyway. I may also end up waiting until the software is more mature too before looking into it.

      • Matt@netmonkey.tech
        link
        fedilink
        English
        arrow-up
        5
        ·
        1 year ago

        That’s awesome! Running my own social media instances has become a hobby for me.

        Having my own Lemmy instance has felt fairly seamless versus using Lemmy.world, but there have been some kinks. For example, when attempting to subscribe to a new community, the server has to pull a bunch of data first. This takes several seconds, but the UI simply says “not found” – and then after several seconds, the UI updates with the community you want to follow. I figured this out by tailing the logs.

        Also, the installation was pretty damn easy, especially when compared to Mastodon.

        • ipkpjersi@lemmy.one
          link
          fedilink
          English
          arrow-up
          4
          ·
          edit-2
          1 year ago

          I’d maybe be interested in trying out self-hosting Mastodon at some point too, good to hear that Lemmy was easy to install though. I’m not too worried since I have quite a bit of Linux experience, I figure it probably won’t be too bad to setup whatever social media instances I’m interested in checking out.

          • Matt@netmonkey.tech
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            Yeah, if you’ve got a decent amount of Linux experience, I don’t think you’ll have any issues. Mastodon’s installation is well-documented and works. My only criticism is that it’s a bit long and you have to be careful not to miss anything.

            On the other hand, I recall installing Pixelfed back several months ago and having a difficult time. The documentation was lacking, and it required me to use Arch Linux, which I had never used. I was able to get it working, but eventually terminated the instance after a while because I was never using it.

      • jcg@halubilo.social
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        Personally, I went with Lemmy because it seems to be quite a bit further along in it’s development. It also doesn’t look like kbin’s developer is recruiting much outside help, if you look at the repos of the two projects on GitHub/Codeberg, Lemmy has tons of contributions from people while kbin is mostly just the one guy with a few commits here and there. Not to mention that Lemmy’s way less of a resource hog because it’s written in Rust whereas kbin is implemented in PHP. Also, as far as I know federation is still currently broken on kbin.

        • ipkpjersi@lemmy.one
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          1 year ago

          The reason why I’d consider kbin is because I almost think I might prefer the interface, also I’m more of a PHP developer myself so that is tempting in and of itself too lol

          I may wait a little bit before trying out either one tbh and maybe I’ll give both of them a try.

      • UselesslyBrisk@infosec.pub
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        1 year ago

        As someone that has spent the better part of the week mucking with it… the kbin build docs have multiple gaps in the documentation and are functionally broken unless you have some better understanding of the setup. I WAS able to get the system built, but could never get it online. Best i got was 500 errors where the UI was up but there was a break somewhere in Redis, Postgres, Nginx etc. All the logs were clean though. This was with the docker method and build from source method on both Ubuntu 22.04 and Debian 11 (which are what he specifically referenced)

        Lemmy was much easier to setup using the ansible method. I have an instance online. Though im still working out the federation thing and some other kinks. I figured it would just reach out to Activity pub and federate with everyone but now it seems I have to build a static list…If if search for an instance i know exists I get a

        404: couldnt_find_community

        So there are some gaps but it seems much more mature. For example you cant mark your instance private AND have federation enabled. If you do that and restart the instance will fail to come up, but theres no warning or error in the UI.

        I like the kbin dev better as people. But the lemmy code is definately more polished, even if the devs are turd sammiches.

        • ipkpjersi@lemmy.one
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Well that’s interesting, and somewhat like I expected but not really, I am surprised the setup process for kbin is that broken, although I guess it does make some sense since kbin is that much newer.

          • UselesslyBrisk@infosec.pub
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            Yeah. I like the kbin dev as a person much better. And I can empathize with what he is going through. Its why i wanted to setup an instance and help spread the load. But I just couldnt get it working and didnt have the time to really dig in (I have a lot going on otherwise with work).

            He did announce he is onboarding a sysadmin/netadmin to handle the stability and scaling issues so he can focus on commits which is good. Ill keep an eye out for updates and maybe migrate then.

    • JCreazy@midwest.social
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      Can you tell me a bit about the process you went through to create your own instance? I’d like to make one myself.

      • Matt@netmonkey.tech
        link
        fedilink
        English
        arrow-up
        7
        ·
        1 year ago

        You’re talking about Lemmy, right?

        I provisioned an Ubuntu 22.02 server at Linode. I chose their 2 GB Shared CPU instance type. Once I configured the server to my liking, I ran through the Lemmy-Ansible instructions. (They have other methods, so check the documentation.)

        Essentially, you install Ansible on your workstation. I’m on macOS and installed it via Homebrew. You then download their git repository, create the necessary configuration files, and then have Ansible configure the server. It was fairly simple.

        • JCreazy@midwest.social
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 year ago

          I may go that route. I was wanting to host my own server but I feel like it would be easier to just use a cloud server

          • UselesslyBrisk@infosec.pub
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            I have a lab at home and do host some stuff for myself from there in a small DMZ (ie: Miniflux RSS readers, Plex through Reverse proxy etc).

            But I used a linode for my lemmy/kbin stuff. Reason being is that the code is fairly new and there may be exploits bugs and

            1. I dont want to deal with my ISP made an instance is exploited and becomes some type of C2 box or spews out spam. Kbin specifically already has PRs to fix XSS and Sql injection stuff, the former of which is usually avoidable if you just follow some pretty basic principles. So its a concern.

            2. Linode has better bandwidth than my non-symmetrical ISP uplink and is on its own quota.

            • JCreazy@midwest.social
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              It sounds like linode is the way to go then and their prices seem reasonable. The funny thing is I’ve heard of linode before because Computer Clan uses it as a sponsor, but ever since I started using sponsor block I haven’t really heard about it. I didn’t actually know what they did.

              • UselesslyBrisk@infosec.pub
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                I’ve run linodes for years. My blog runs on them. I still host a variety of other services on them. They are good for everything from gaming servers to a blog etc.

                They did get bought out by akamai a while back. And have raised their prices but they are still solid.

                Nanodes are awesome deals frankly.

                • JCreazy@midwest.social
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  1 year ago

                  Is the 2GB the one you use for your Lemmy server? I’m getting ready to purchase one to see if I can figure it out.

    • dart@lemmy.fmhy.ml
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      1
      ·
      1 year ago

      On the flip side, it’s more expensive

      Can you go into more detail on this?

      • Matt@netmonkey.tech
        link
        fedilink
        English
        arrow-up
        12
        ·
        1 year ago

        Sure.

        I run my own instance at a cloud provider, and thus have monthly expenses I wouldn’t normally incur, if I were using a public instance.

        • Jeena@jemmy.jeena.net
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 year ago

          The fun part is that you can run it on the same server as your mastodon is already running with no additional costs.

        • dart@lemmy.fmhy.ml
          link
          fedilink
          English
          arrow-up
          3
          arrow-down
          1
          ·
          1 year ago

          Oh, gotcha. I guess if using a personal local server, then the only recurring cost would be electricity.

          • Matt@netmonkey.tech
            link
            fedilink
            English
            arrow-up
            5
            ·
            1 year ago

            Yes, there is electricity.

            I think Internet connectivity could also be an issue, unless you have an ISP that’s friendly to you running a publicly accessible server on your Internet connection at home.

            • maynarkh@feddit.nl
              link
              fedilink
              English
              arrow-up
              4
              ·
              edit-2
              1 year ago

              Could you run a local server on your desktop that you only turn on whenever as a client? I don’t really understand the Fediverse’s architecture yet, but as far as I saw instances being down are not a big problem beyond not being able to log in if it’s your home instance, and communities fracturing to separate discussions in other instances’ local federation caches that only get resynced when the thing comes back up.

              What prevents me from running my own instance as a very heavy client? Discounting the public DNS + static globally routable IP part as those can be solved IMO.

              • Matt@netmonkey.tech
                link
                fedilink
                English
                arrow-up
                5
                ·
                edit-2
                1 year ago

                I’ve wondered that myself, and I don’t know, to be honest, but there are some issues you’d certainly encounter. For example, if you posted any media it would need to be somewhere “always on” or remote instances and users might not be able to see it unless they managed to cache it on time. It means that your posts URLs wouldn’t be accessible, and would only be available on servers to which it has already federated. There may be other issues, too, such as queues only keeping undelivered messages for so long, etc.

                I’m sure someone with a good understanding of ActivityPub could explain whether or not this is possible.

              • Jeena@jemmy.jeena.net
                link
                fedilink
                English
                arrow-up
                2
                ·
                1 year ago

                Yes you could, but if your instance is down often, it might be that there is some timeout in ActivityPub when your instance will be marked as gone for others and might not get new content once it is up again.

      • Matt@netmonkey.tech
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        I’m using Linode, and their prices are publicly available.

        https://www.linode.com/pricing/

        For Mastodon, I’m using the Linode 4 GB while the Lemmy server runs on the Linode 2 GB option. Both are under the Shared CPU pricing – not dedicated.

        • immediate_winter@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          edit-2
          1 year ago

          thanks for all of the information you’ve shared in this thread.

          i was put off by the cost and effort involved in maintaining a mastadon instance when i looked into that a while back, but i’m glad to hear that lemmy could be cheaper.

  • jon@lemmy.tf
    link
    fedilink
    English
    arrow-up
    29
    ·
    edit-2
    1 year ago

    From what I’ve seen and read, server to server traffic is less taxing on instances than client to server. So even if your instance is JUST you, it would be your instance talking to everything else so it would have some net benefit on the federation. But it would take a lot of users self-hosting solo instances for this to help in any noticeable way, I’d think.

    There is certainly no downside to running a solo instance, if you’re even slightly interested I would say go for it!

    • Album@lemmy.world
      link
      fedilink
      English
      arrow-up
      11
      arrow-down
      1
      ·
      1 year ago

      It’s only less taxing if it’s multiple ppl on an instance.

      If every solo user spun up an instance just for themselves there wouldn’t be a benefit over all those users just signing up directly to an existing instance.

      Eg 5 users on instance b trying to access instance a Is better then 5 users each with their own instance trying to access instance a.

      • Saik0@lemmy.saik0.com
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        If every solo user spun up an instance just for themselves there wouldn’t be a benefit over all those users just signing up directly to an existing instance.

        Not quite true… There’s a ton of sql queries that go on to show you the correct content for your user. Showing the correct subscriptions, applying the correct “bans” etc… Further sessions management of the user logging in itself… Direct messages, inbox management… etc…

        Just the raw content being sent to sync is just minimal text data that’s effectively broadcasted. The stress of that is virtually nothing in comparison.

        The break even is that a ton of data might sync that you never look at… but it’s a broadcast of sorts. So that’s a bit of a non issue.

      • thatcasualgamingguy@lemmy.nerdcore.social
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Wouldn’t it still be a bit less taxing even with only one user? If I’m not mistaken then your instance only initially requests a community/post/comment from another instance when you specifically search for it. After that your server gets updates through activities pushed by the other instance. So if you refresh a post multiple times those requests only go to your instance. It somewhat acts like a cache, while the other instance can push activities at it’s own pace instead of being hammered with requests. Of course multiple users per instance would still be better.

        • festus@lemmy.ca
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          It acts like a cache, yes, but now the other instance has to send a push to keep every user’s instance updated, whereas if there were only a few instances with lots of users only a few instances needed to get updated.

  • Jeena@jemmy.jeena.net
    link
    fedilink
    English
    arrow-up
    24
    ·
    1 year ago

    I feel that speed is the biggest benefit. I was on kbin.social and in the beginning everything was fine, but after a while when they got more and more users it was terrible. Every second click led me to cloudflare sometimes even with the capcha.

    On my own instance now since yesterday everything is so fast! I chose lemmy because it’s written in Rust and I have the feeling that it will be more resourceful and with less bugs than /kbin because of that ^^

    • matt@lemmy.koski.co
      link
      fedilink
      English
      arrow-up
      10
      ·
      1 year ago

      Yeah, I’m running on an instance of just me and my wife, biggest downside is needing to subscribe to communities before we get content, but its sooo much faster.

      • Jeena@jemmy.jeena.net
        link
        fedilink
        English
        arrow-up
        8
        ·
        1 year ago

        I almost think this is a blessing because you don’t get so overwhelmed with stuff you don’t care about and only see what you’re looking for. But yes the UI for it is not very good yet.

        • AFallingAnvil@lemmy.ca
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          I’ve taken to just blocking the more popular communities I don’t care about, like sports stuff

      • death916@lemmy.death916.xyz
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        Once I subbed to a few things now it seems my all feed gets content from servers and communities I’m not subscribed too. Just took a bit. Mostly from smaller foreign ones right now tho.

    • death916@lemmy.death916.xyz
      link
      fedilink
      English
      arrow-up
      3
      arrow-down
      2
      ·
      1 year ago

      Once I subbed to a few things now it seems my all feed gets content from servers and communities I’m not subscribed too. Just took a bit. Mostly from smaller foreign ones right now tho.

      • banana1@lemmy.ca
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        1 year ago

        Deleted, I figured out you were not conplaining, but responding to another comment

  • idle@158436977.xyz
    link
    fedilink
    English
    arrow-up
    23
    ·
    1 year ago

    I did it. So far I’ve noticed a few things, for example you have to populate/federate the communities yourself, and it can take a long time. It took hours to retrieve and catch up all the lemmy.world posts. I expect it to be an ongoing thing. When you first connect to a community, it downloads the first 20 posts, but all the comments are empty.

    The plus side though is it is very fast for me. And nobody can delete my profile.

      • Joe B@lemmy.world
        link
        fedilink
        English
        arrow-up
        17
        ·
        1 year ago

        You gotta remember, The blackout brought us refugees I don’t think lemmy planned for this. I think the updates that are coming will address all of this. Reddit is decades old. Lemmy is new to all of us. We just gotta wait and eventually it will become second nature and we will be as good as Reddit

        • jason@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          4
          ·
          1 year ago

          Oh totally. It wasn’t a knock at the software at all. In fact. I’m surprised by how well this works as a drop-in replacement for Reddit for me and both Lemmy and Kbin are solid.

          The reason I asked was that, with my single-user Mastodon instance, likes/boosts and comments are nearly always incomplete on my server just because of the way federation works. I was just wondering if that was something smaller instances had to deal with in perpetuity or if it was just a one-off issue that happened at the start.

          The OP commented below saying that comments appeared to be loading instantaneously after that initial hiccup.

      • idle@158436977.xyz
        link
        fedilink
        English
        arrow-up
        8
        ·
        1 year ago

        As far as I can tell yes. Once the federation catches up the backlog, comments and posts seem to be near instantaneous.

    • ylambda@tagpro.lol
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I like running my own too, and agree it’s a bit of a chore to get content.

      I feel the biggest hurdle is finding communities. I wish the instance would automatically index communities from federated instances. I don’t mean track posts/comments, just keep a record of the communities existence.

      Looking them up elsewhere, then searching locally, waiting for it to work, then subscribing is a bit of work and I’ve only bothered with about 10 so far.

  • luis@kleptonix.com
    link
    fedilink
    English
    arrow-up
    19
    ·
    1 year ago

    Running my own instance using AWS’s free tier for now, though I think I’ll keep it after. It makes scaling soo easy and simple if my instance ever takes off. Which I don’t know if it ever will lol. The reason why I even created one is to actually use my domain name for something rather than keep paying for a domain that I’ll never use for anything.

    • Shelldor@lemmy.ml
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      Which of the free AWS ones did you choose. I just had a look and there are lots of different ones which is best for lemmy?

      • luis@kleptonix.com
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        I’m using a t2.micro instance which I think is best for a small instance like mine, but I think there are other options you can look into with different RAM and CPU.

  • fcuks@lemmy.world
    link
    fedilink
    English
    arrow-up
    18
    ·
    1 year ago

    In my navigation of the fediverse the last few days I’ve noticed a few people running instances of mastodon and lemmy with just themselves or 1 or 2 other people etc.

    If you into tinkering and selfhosting, why not :D Means you’re in full control of what other instances you federate with/can see etc.

  • infinitevalence@discuss.online
    link
    fedilink
    English
    arrow-up
    16
    ·
    1 year ago

    I was discussing this with other lemmings on matrix and it seems there is not much help if you dont have a community to build on your own instance. Now if you do host for yourself then you can federate with other instances to subscribe and pull from their communities which does reduce the total load on those services but that is about it.

    Communities are going to Win/Loose based on personalities and critical mass, and the people hosting those communities will just have to increase their hosting needs.

    • Matt@netmonkey.tech
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      Now if you do host for yourself then you can federate with other instances to subscribe and pull from their communities which does reduce the total load on those services but that is about it.

      That is the main thing I’m doing, personally.

      Communities are going to Win/Loose based on personalities and critical mass, and the people hosting those communities will just have to increase their hosting needs.

      Speaking of hosting, I got to thinking what might happen when a community needs to move to another server. I wonder if some day we’ll see a solution similar to Mastodon’s where users can move their accounts and/or entire communities between Lemmy instances.

    • Red Wizard 🪄@lemmygrad.ml
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      It does give you authentication security in that, you should only have an issue if your instance is down. If the instance your account is tied to goes up and down then your ability to access your subscriptions and participate are also up and down.

      I wish the identity stuff and authentication was separated from instances, but unfortunately it isn’t.

  • meteokr@community.adiquaints.moe
    link
    fedilink
    English
    arrow-up
    15
    ·
    1 year ago

    I host my own instance, but I like selfhosting as a hobby. I really love having all my account/login stuff on my own hardware and my own backups. If I break something, its just my own stuff that broken, no harm done to any other users. I don’t really plan on hosting any of my own communities, just participating in others. I’m an avid seflhoster, and my setup is pretty exotic compared to the vast majority of hosters, but I got the whole thing working perfectly over a day. Much better than when I tried to get mastodon working. More power to more fediverse stuff though.

  • marsta@beehaw.org
    link
    fedilink
    English
    arrow-up
    15
    ·
    1 year ago

    Appreciate if you guys shared some guides on setting it up. I’m not new to selfhosting but tried setting it up and failed with strange errors all day long :(

    • Juniper@skein.city
      link
      fedilink
      English
      arrow-up
      7
      ·
      1 year ago

      Not sure if you got it sorted or not, but if you were following the docker-compose method documented by the devs, there were a couple hurdles I ran into. The one that may be relevant here is that at some point their docker-compose.yml did not expose the Lemmy backend to the Internet, and so all federation was failing. That said, I checked just now and they seem to have fixed that issue upstream. So you should be able to re-pull their docker-compose.yml and it should work.

    • meteokr@community.adiquaints.moe
      link
      fedilink
      English
      arrow-up
      5
      arrow-down
      5
      ·
      1 year ago

      No worries, this is a fairly complex piece of software. If you really want to though, try copy pasting your errors into chatgpt if you can. While not perfect, it usually can give you an idea of what steps are going wrong. Some of us can help you too, but it’s no pressure. Being a part of the community is more than just the machines, it’s the friends we made along the way.

      • awderon@lemmy.world
        link
        fedilink
        English
        arrow-up
        10
        ·
        1 year ago

        I think it would be better if @marsta@beehaw.org would post the errors so the solution to his problems is documented in case someone else has a similar problem.

        This way we could google problems and just add lemmy instead of reddit to find a proper solution.

        • meteokr@community.adiquaints.moe
          link
          fedilink
          English
          arrow-up
          3
          ·
          edit-2
          1 year ago

          Of course, the most important aspect of fixing a problem, is writing down how you fixed it. Never know what a different, but similar problem might crop up again. Sometimes getting a quick answer, or having a human readable explanation for an error goes a long way. Often enough I’ll have complex logs entries that I can’t parse what the problem actually is, I can quick copy paste and get a normal people paragraph. Sometimes “os: error (-4) aborting” actually just means you forgot to change user permissions on your volume folder. In a perfect world, all program’s logs would be perfectly readable by machines and people at the same time. :P

  • twitterfluechtling@lemmy.pathoris.de
    link
    fedilink
    English
    arrow-up
    14
    ·
    1 year ago

    I started my own instance and do currently not intend to open it for others (besides, maybe, close friends and family).

    My intention are

    • to learn more about the concepts
    • evaluate how reliable the replication of comments and posts works
    • maybe create my own pseudo-community just for myself, as kind of a simplified blog

    Reading other posts in this sub, I saw it is still seen as offloading the main servers, as the replication of the data is a low load compared to serving the UI. Maybe one of these motivations apply to you, too? Or you find another one? At the end of the day, host your own instance if you want to :-)

    • denton@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Is there a tutorial or something out there? I’ve got no background in any of this but would like to maybe give it a go myself at some point. Would you be willing to say how much it costs as well?

      • twitterfluechtling@lemmy.pathoris.de
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Depends, what do you mean with “no background in any of this”? I started yesterday and set up the instance within 3h, starting around 1h after I saw the name “Lemmy” the first time. I still have to iron out some issues.

        But I do have a strong background with docker, Linux administration, networking, and generally DevOps, and I do have a virtual root server up and running for some time.

        If you have no background in docker and Linux (administration), I would say you’d do better focusing on smaller things, running some servers locally in docker and so on. There should be lots of opportunities to have a quick success to build up on.

        If you have that background already and only have no background in the topics of Fediverse and Lemmy, https://join-lemmy.org/docs/en/administration/install_docker.html provides some relatively easy to follow instructions.

        The costs are basically the costs of an always on Linux server, preferably with a fixed IP address. I’m not sure what you would pay wherever you live, I pay ~15€/month for 8GB, 4 cores, virtual root server with my own domain name.

        • denton@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          But I do have a strong background with docker, Linux administration, networking, and generally DevOps, and I do have a virtual root server up and running for some time.

          By no background I mean nothing in any of that at all 😂. The only mildly relevant thing I have a background in is bioinformatics but even that’s a stretch…

          However, I did also have 0 background in 3D modelling, 3D printing or handwiring keyboards and now I’ve made quite a few that all work so… We’ll see! (I guess lol)

          • twitterfluechtling@lemmy.pathoris.de
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            Well, just for playing around you should be able to set it up using something like dyndns on a laptop at home, at no cost (except for time). If you want to go for it, that’s what I would suggest :-) When that works, think about getting the virtual-root-server at monthly costs…

  • Midas@ymmel.nl
    link
    fedilink
    English
    arrow-up
    13
    ·
    1 year ago

    Everything is under your control, you’ll never be collateral damage. Cooler username?

    • jcg@halubilo.social
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago
      • only the ones that host communities you subscribe to, in fact you can specifically whitelist certain instances
      • yes, comments and posts made from other instances are forwarded on to subscribers
      • yes, for the same reason